CHS Snowmakers
HTM Group Fittings & Niedner Hose
Snowmaking Hose
Overstock Niedner Snowhose 2000, 10% off list prices, discounted prices below (May 6, 2008)
1.5" x 25 with 2"
HTM fittings quantity 7 $99.90 each
1.5" x 50' with HTM fittings quantity 10 $140.40 each
|
2" x 50' Niedner Snowmaking Hose with HTM fittings |
Niedner |
Niedner Econoforest hose
|
|
Construction: |
Circular woven, double jacket 100% virgin spun polyester. |
|
Tube: |
Extruded T.P.U. elastomer - Ozone and age resistant. |
|
Length: |
50' to 100' (15,2 to 30,5 m). |
|
Jacket Treatment: |
ENCAP® encapsulation (yellow). Provides water repellency,
abrasion, oil and chemical resistance. |
Note:
Custom length hoses available in 10', 15' and 25' lengths.
1.5" and 2" hoses available with MNPT ends or double female or double male cam
ends.
2.5" hoses available.
Volume discounts apply, call for a quote.
|
Description |
Cost |
|
¾”
x 50’ ECONOFOREST with yellow ENCAP treatment, couple with brass GHT set |
|
|
¾”
x 100’ ECONOFOREST with yellow ENCAP treatment, couple with brass GHT
set |
|
| 1" x 50' Niedner hose with male NPT ends | |
|
1
½” x 50’ Snow Hose 2000 with yellow ENCAP treatment, coupled with E/R
HTM CAMLOCK set |
|
|
1
½” x 100’ Snow Hose 2000 with yellow ENCAP treatment, coupled with
E/R HTM CAMLOCK set |
|
|
2”
x 50’ Snow Hose 2000 with yellow ENCAP treatment, coupled with E/R HTM
CAMLOCK set |
|
|
2”
x 100’ Snow Hose 2000 with yellow ENCAP treatment, coupled with E/R HTM
CAMLOCK set |
|
CHS - Niedner Customers
Arapahoe Basin, CO
Eldora, CO
Breckenridge, CO
Chapman Hill, CO
Sol Vista, CO
Echo Mountain, CO
Powderhorn, CO
Steamboat, CO
Howelsen Hill, CO
Durango Mtn, CO
Telluride, CO
Vail, CO
Colorado Mtn College, CO
Angelfire, NM
Sipapu, NM
Taos, NM
Ski Apache, NM
Santa Fe, NM
Sandia Peak, NM
Wolf Mountain, UT
Brianhead, UT
Mt Baldy, CA
Mt High, CA
Hume Lake Christian Camp, CA
Jackson Hole, WY
Red Lodge, MT
Big Sky, MT
Bridger Bowl, MT
Great Divide, MT
Sunrise, AZ
Winter Thunder Snow Cross, IL
|
NOM. ID |
Test Pressure |
Burst Pressure |
| in | psi | psi |
| 3/4" | 300 | 600 |
| 1* | 300 | 1000 |
| 1.5" | 800 | 2000 |
| 2" | 800 | 2000 |
*Note: The 1" snowmaking hose is also Niedner hose.
|
Contractors
Grade Garden Hose ¾”
x 50’ – 250 psi working pressure, 1000 psi burst strength rated for
both air and water. This is the best garden hose on the market and it
stays flexible in the cold.
|
HTM Group fittings, hydrants
and electrical components
HTM Group products listed below are extremely well built and designed specifically for snowmaking applications. HTM has many happy customers around the world including our own customers listed below.
CHS - HTM customers
Beaver Creek, CO
Copper Mtn, CO
Colorado Mtn College, CO
Beaver Creek, CO
Sol Vista, CO
Eldora, CO
Steamboat, CO
Telluride, CO
Arapahoe Basin, CO
Howelsen Hill, CO
Ski Apache, NM
Sipapu, NM
Santa Fe, NM
Wolf Mountain, UT
Brianhead, UT
Park City, UT
Homewood, CA
Snow Drifts, CA
Mt Baldy, CA
Mt High, CA
Snow Valley, CA
Jackson Hole, WY
Red Lodge, MT
Big Sky, MT
Bridger Bowl, MT
Sunrise, AZ
The Summit at Snoqualmie, WA
Winter Thunder Snow Cross, IL
HTM
CAM & GROOVE ADAPTORS –
NPT 750 psi rated, all fittings are EXTRUDED ALUMINUM ALLOY – HARD-COAT
ANODIZED for durability.
Call for a quote, due to raw materials cost increase.
PART |
Description |
|
CA1512 |
TYPE
A – 1 ½” MALE CAM X 1 ¼” FEMALE NPT |
|
CA1515 |
TYPE
A – 1 ½” MALE CAM X 1 ½” FEMALE NPT |
|
CA2015 |
TYPE
A – 2” MALE CAM X 1 ½” FEMALE NPT |
|
CA2020 |
TYPE
A – 2” MALE CAM X 2” FEMALE NPT |
|
CA2520 |
TYPE
A – 2 ½” MALE CAM X 2” FEMALE NPT |
|
CA2525 |
TYPE
A – 2 ½” MALE CAM X 2 ½” FEMALE NPT |
|
CB1515 |
TYPE
B – 1 ½” FEMALE CAM X 1 ½” MALE NPT |
|
CB1520 |
TYPE
B – 1 ½” FEMALE CAM X 2” MALE NPT |
|
CB2020 |
TYPE
B – 2” FEMALE CAM X 2” MALE NPT |
|
CB2025 |
TYPE
B – 2” FEMALE CAM X 2 ½” MALE NPT |
|
CB2525 |
TYPE
B – 2 ½” FEMALE CAM X 2 ½” MALE NPT |
|
CD1512 |
TYPE
D – 1 ½” FEMALE CAM X 1 ¼” FEMALE NPT |
|
CD1515 |
TYPE
D – 1 ½” FEMALE CAM X 1 ½” FEMALE NPT |
|
CD2015 |
TYPE
D – 2” FEMALE CAM X 1 ½” FEMALE NPT |
|
CD2020 |
TYPE
D – 2” FEMALE CAM X 2” FEMALE NPT |
|
CD2520 |
TYPE
D – 2 ½” FEMALE CAM X 2” FEMALE NPT |
|
CD2525 |
TYPE
D – 2 ½” FEMALE CAM X 2 ½” FEMALE NPT |
|
CF1515 |
TYPE
F – 1 ½” MALE CAM X 1 ½” MALE NPT |
|
CF1520 |
TYPE
F – 1 ½” MALE CAM X 2” MALE NPT |
|
CF2015 |
TYPE
F – 2” MALE CAM X 1 ½” MALE NPT |
|
CF2020 |
TYPE
F – 2” MALE CAM X 2” MALE NPT |
|
CF2025 |
TYPE
F – 2” MALE CAM X 2 ½” MALE NPT |
|
CF2525 |
TYPE
F – 2 ½” MALE CAM X 2 ½” MALE NPT |
|
CDC15 |
DUST
CAP – 1.5” |
|
CDC20 |
DUST
CAP – 2” |
HTM
H-Series snowmaking hydrants –
2 inch size (NPT), internal drain.
Call for a quote, due to raw materials cost increase.
Note: 2.5” H-Series hydrants also available.
PART |
Description |
|
H20F-030T |
30
CM (1’) RISER, 2” FNPT INLET |
|
H20F-060T |
60
CM (2’) RISER, 2” FNPT INLET |
|
H20F-090T |
90
CM (3’) RISER, 2” FNPT INLET |
| H20F-100T | 100cm (3.3 ft) RISER, 2" F NPT INLET |
|
H20F-120T |
120
CM (3.9’) RISER, 2” FNPT INLET |
|
H20F-150T |
150
CM (4.9’) RISER, 2” FNPT INLET |
|
H20F-180T |
180
CM (5.9’) RISER, 2” FNPT INLET |
|
H20F-210T |
210
CM (6.9’) RISER, 2” FNPT INLET |
|
H20F-240T |
240
CM (7.9’) RISER, 2” FNPT INLET |
|
H20F-270T |
270
CM (8.9’) RISER, 2” FNPT INLET |
|
H20F-300T |
300
CM (9.8’) RISER, 2” FNPT INLET |
|
H20F-330T |
330
CM (10.8’) RISER, 2” FNPT INLET |
|
H20F-360T |
360
CM (11.8’) RISER, 2” FNPT INLET |
|
H20F-400T |
400
CM (13.1’) RISER, 2” FNPT INLET |
|
|
|
|
H20M-030T |
30
CM (1’) RISER, 2” MNPT INLET |
|
H20M-060T |
60
CM (2’) RISER, 2” MNPT INLET |
|
H20M-090T |
90
CM (3’) RISER, 2” MNPT INLET |
| H20M-100T | 100cm (3.3 ft) RISER, 2" M NPT INLET |
|
H20M-120T |
120
CM (3.9’) RISER, 2” MNPT INLET |
|
H20M-150T |
150
CM (4.9’) RISER, 2” MNPT INLET |
|
H20M-180T |
180
CM (5.9’) RISER, 2” MNPT INLET |
|
H20M-210T |
210
CM (6.9’) RISER, 2” MNPT INLET |
|
H20M-240T |
240
CM (7.9’) RISER, 2” MNPT INLET |
|
H20M-270T |
270
CM (8.9’) RISER, 2” MNPT INLET |
|
H20M-300T |
300
CM (9.8’) RISER, 2” MNPT INLET |
|
|
Service
wrench for 2” hydrants $95 to $130 |
|
H20x-xxxY |
ANGLED
(45°) HEAD VERSION |
|
H20x-xxxxG |
GAUGE
PORT HEAD VERSION |
|
H20V-xxxx |
VICTAULIC
GROOVE INLET VERSION ADD: |
HTM
E-Series snowmaking hydrants –
1.5 inch size (NPT) external drains.
Call for a quote, due to raw materials cost increase.
PART |
Description |
|
E15M2-030T |
30
CM (1’) RISER, 2” MNPT INLET |
|
E15M2-060T |
60
CM (2’) RISER, 2” MNPT INLET |
|
E15
M2-090T |
90
CM (3’) RISER, 2” MNPT INLET |
|
E15
M2-120T |
120
CM (3.9’) RISER, 2” MNPT INLET |
|
E15
M2-150T |
150
CM (4.9’) RISER, 2” MNPT INLET |
|
E15M2-180T |
180
CM (5.9’) RISER, 2” MNPT INLET |
|
E15M2-210T |
210
CM (6.9’) RISER, 2” MNPT INLET |
|
E15M2-240T |
240
CM (7.9’) RISER, 2” MNPT INLET |
|
E15M2-270T |
270
CM (8.9’) RISER, 2” MNPT INLET |
|
E15M2-300T |
300
CM (9.8’) RISER, 2” MNPT INLET |
|
|
Service
wrench for 1.5” hydrants $95 to $115 |
HTM
E-Series snowmaking hydrants
–
2 inch size (NPT)
external drains.
Call for a quote, due to raw materials cost increase.
PART |
Description |
|
E20M-030T |
30
CM (1’) RISER, 2” FNPT INLET |
|
E20M-060T |
60
CM (2’) RISER, 2” FNPT INLET |
|
E20M-090T |
90
CM (3’) RISER, 2” FNPT INLET |
|
E20M-120T |
120
CM (3.9’) RISER, 2” FNPT INLET |
|
E20M-150T |
150
CM (4.9’) RISER, 2” FNPT INLET |
|
E20M-180T |
180
CM (5.9’) RISER, 2” FNPT INLET |
|
E20M-210T |
210
CM (6.9’) RISER, 2” FNPT INLET |
|
E20M-240T |
240
CM (7.9’) RISER, 2” FNPT INLET |
|
E20M-270T |
270
CM (8.9’) RISER, 2” FNPT INLET |
|
E20M-300T |
300
CM (9.8’) RISER, 2” FNPT INLET |
|
H20x-xxxY |
ANGLED
(45°) HEAD VERSION |
|
H20x-xxxxG |
GAUGE
PORT HEAD VERSION |
|
H20V-xxxx |
VICTAULIC
GROOVE INLET VERSION ADD: |
HTM Filters and gaskets
PART |
Description |
|
CG-15F |
1.5”
Face gasket |
|
CG20F-1 |
2”
Face gasket |
|
CG25F-1 |
2.5”
Face gasket |
|
|
|
|
|
1.5”
CDF inline Filter complete 60 mesh |
|
|
2”
CDF inline Filter complete 60 mesh |
|
CDS15-60 |
CDS
Style screen 1.5” |
|
CDS20-60 |
CDS
Style screen 2” |
|
|
1.5”
CLF inline Filter complete 60 mesh |
|
|
2”
CLF inline Filter complete 60 mesh |
|
CLS15-60 |
CLS
Style screen 1.5” |
|
CLS20-60 |
CLS
Style screen 2” |
|
CLT1515 |
LF
Tower adaptor – 1.5”M x 1.5”FNPT C/W DRAIN |
|
CLT2015 |
LF
Tower adaptor – 1.5”M x 1.5”FNPT C/W DRAIN |
HTM Hose coupling and Electrical plugs
and pedestals
We have all the parts needed for coupling your own snowmaking hose.
Call us for details.
|
Part
|
Description |
|
CX300E |
Expander
without hydraulic pump |
|
CX300P |
Expander
with internal hand hydraulic pump |
|
CT200-1 |
Expansion
unit – 2” w/ camlock spacer |
|
CT3001 |
Ring
removal tool – replacement tip set |
|
|
|
|
PM460C7W |
McGill
cord conn (female) – 60A 480V 3P 4W RED |
|
PM460C5W |
McGill
cord conn (female) – 60A 600V 3P 4W BLACK |
|
PM460P7W |
McGill
cord conn (male) – 60A 480V 3P 4W |
|
PM460P5W |
McGill
cord conn (male) – 60A 600V 3P 4W |
|
HBL460C7W |
Hubbell
cord conn (female) – 60A 480V 3P 4W RED |
|
HBL460C5W |
Hubbell
cord conn (female) – 60A 600V 3P 4W BLACK |
|
HBL460P7W |
Hubbell
cord conn (male) – 60A 480V 3P 4W RED |
|
HBL460P5W |
Hubbell
cord conn (male) – 60A 600V 3P 4W BLACK |
|
PM460RS7W |
McGILL
RECEPTACLE – 60A 480V 3P 4W RED |
|
PM460RS5W |
McGILL
RECEPTACLE – 60A 600V 3P 4W BLACK |
|
HBL460R7W |
HUBBELL
RECEPTACLE – 60A 480V 3P 4W RED |
|
HBL460R5W |
HUBBELL
RECEPTACLE – 60A 600V 3P 4W BLACK |
|
Many
options available for electrical pedestals including double heads.
SMP series needs base unit. To
best match your current electrical plugs please include brand name and
model numbers on plug. |
|
|
SMP-60H7-5 |
SMP
Series electric pedestal 60A 480V IEC PIN-SLEEVE-5k AIC |
|
200-3300-2 |
Base
unit-200A 600V 48” high-2-300MCM/phase |
|
210-3300-2 |
Base
unit-200A 600V 60” high-2-300MCM/phase |
|
SE-1060HL-5-hh |
SE
Series (post mount)60A 480V IEC PIN-SLEEVE – 5kAIC |
|
SE-1030H7-10-hh |
SE
Series (post mount)30A 480V IEC PIN-SLEEVE – 10kAIC |
We have parts for all items listed and we have hose coupling sets, replacement cam arms, tail gaskets and expansion rings. Didn’t find it on this list, contact us and we will find it. Shipping not included on HTM Group products.
for complete details of HTM Group products click here.
|
|
|
|
|
Type A
|
Type B
|
Type D
|
Type F
|
|
|||
|
|
|
|
Type C
|
Type E
|
Type T
|
|
||
|
|
|
Dust Cap
|
Inline
Coupler with Pressure Test Port
|
Conversion Chart
For more conversions go to Online
Conversion.
| CFM | Cubic meter/min | PSI | BAR | Fº | Cº | GPM | L/min |
| 5.7 | 0.16 | 60 | 4.13 | 32 | 0 | 1 | 3.785 |
| 11.3 | 0.32 | 90 | 6.2 | 28 | -2.2 | 5 | 18.92 |
| 11.8 | 0.33 | 100 | 6.9 | 25 | -3.8 | 10 | 37.85 |
| 18.1 | 0.51 | 150 | 10.35 | 20 | -6.6 | 20 | 75.70 |
| 24.3 | 0.68 | 200 | 13.78 | 15 | -9.4 | 40 |
