|
Home
BIG
SNOWMAKING
Turbocristal
LP2-4
Towers
HTM
Hydrants
Niedner
Snowhose
Drift
Additive
Snowmaking
Systems
Snowmaking
Services
Classifieds
SMALLER
SNOWMAKING
Quick
Snow
Cornice
Snowmaker
Cornice
II Snowmaker
Cornice
III Snowmaker
ADDITIONAL
PRODUCTS
Weather
Stations
Joka
Gloves
Fire
Protection
Air
Compressors
Industry
Partners
Water
Pumps
About
Us
Contact
|
HTM Group fittings, hydrants
and electrical components
We stock several common
cam fittings, many replacement parts including face gaskets and cam pins/arms/
rings and some common hydrants for quick delivery.
New products exclusively from HTM and CHS Snowmakers
The one and only
Snowmakers Multi-Use tool
Our "Cool" tool just took second place in the PNSAA "Cool
Tool" contest.
This tool can serve as a hammer, scraper, hydrant handle for different brands of
hydrants, different size wrenches including a wrench for the Turbocristal nozzle
and K guns. $45 each +$5 shipping
Contact us for ordering more than one.
Cam Pin removal tool - This tool makes it very
easy to remove the pins that hold the cam arms in place. Will work with
nearly an 2" female cam, 1.5" also available. $75 + $10 shipping
Contact us for ordering more than one.
Automatic Tower Drain - This drain spins right
onto a 1.5" male NPT inlet for your tower guns. It has an automatic
drain like a snowmaking hydrant and when the hydrant is turned off this drain
opens and drains the tower protecting it from freezing. It also makes for
easy removal of the hose without residual water pressure. Tower drain
without cam inlet or pressure gauge $75 +$10 shipping. Pictured with
2" FCAM inlet and pressure gauge port (optional). Contact us for
ordering more than one.
Below is a photo of a single head SMP pedestal with the
base. This is the new design for 2008.
Here is the double head SMP pedestal.
HTM H Series hydrant parts drawing
HYDRANT PARTS LIST H20 Series (1996+)
01 HANDLE RETAINER - (6mm S.S. socket
head bolt) All H20 models 0100-0
02 HANDLE RETAINER WASHER - Stainless Steel All H20 models 0200-0
03 VALVE HANDLE – Aluminum All H20 models 0320-1
04 PACKING NUT – Bronze All H20 models 0400-C
06 SHAFT PACKING - Graphite Foil All H20 models 0600-1
09 OPERATING SHAFT - Stainless Steel - Riser length >30cm H20x-xxxT 0900-T
Y-Head units H20x-xxxY 0900-Y
09A OPERATING SHAFT – Stainless Steel - Riser length <30cm H20x-xxxT
09A00-T
Y-Head units H20x-xxxY 09A00-Y
10T DISCHARGE HEAD (T) T-Head NPT H20x-xxxT 10T20-10
T-Head NPT with gauge port H20x-xxxTG 10T20-11
T-Head BSPT H20xB-xxxT 10T20-20
10Y DISCHARGE HEAD (Y) Y-Head NPT H20x-xxxY 10Y20-10
Y-Head NPT with gauge port H20x-xxxYG 10Y20-11
Y-Head BSPT H20xB-xxxY 10Y20-20
11A SHAFT PIN (UPPER) - Stainless Steel All H20 models 11A00-0
11B SHAFT PIN (LOWER) - Stainless Steel All H20 models 11B20-0
12 SHAFT EXTENSION - Galvanized Steel (specify riser length) H20 (riser
>30cm) 1200-xxx
13 RISER PIPE - Galvanized Steel (specify riser length) H20x (NPT) 1320-1-xxx
H20xB (BSPT) 1320-2-xxx
14F VALVE HOUSING - Stainless Steel – Female Inlet H20F (NPT) 14F20-1
H20FB (BSPT) 14F20-2
14M VALVE HOUSING - Stainless Steel – Male Inlet H20M (NPT) 14M20-1
H20MB (BSPT) 14M20-2
14V VALVE HOUSING - Stainless Steel – Victaulic Inlet H20V (NPT) 14V20-1
H20VB (BSPT) 14V20-2
15 DRAIN VALVE RETAINER SCREW - Stainless Steel All H20 models 1500
16 SHAFT SPACER – Stainless Steel (2 required) H20 (riser <30cm) 1620
17 DRAIN VALVE BALL - Stainless Steel (4 required) All H20 models 1700
18 DRAIN VALVE SPRING - Stainless Steel (4 required) All H20 models 1800
19 VALVE SCREW - Stainless Steel All H20 models 1920
20 VALVE DISC - Stainless Steel All H20 models 2020
21 DISC RETAINER NUT - Stainless Steel All H20 models 2120
22 O-RING (Upper Seal) - Buna-N Rubber 80 Durometer All H20 models 2220
23 O-RING (Lower Seal) - Buna-N Rubber 90 Durometer All H20 models 2320
24 VALVE BODY - Bronze All H20 models 2420
25 O-RING (Disc Seal) - Buna-N Rubber 70 Durometer All H20 models 2500
26 DISC RETAINER PIN All H20 models 2600
HTM E Series hydrant parts drawing
HYDRANT PARTS LIST E20
Series
01 HANDLE RETAINER - (6mm S.S. socket
head bolt) All E20 models 0100-0
02 HANDLE RETAINER WASHER - Stainless Steel All E20 models 0200-0
03 VALVE HANDLE – Aluminum All E20 models 0320-1
04 PACKING NUT – Bronze All E20 models 0400-C
06 SHAFT PACKING - Graphite Foil All E20 models 0600-1
09 OPERATING SHAFT - Stainless Steel - Riser length >30cm E20x-xxxT 0900-T
Y-Head units E20x-xxxY 0900-Y
09A OPERATING SHAFT – Stainless Steel - Riser length <30cm E20x-xxxT
09A00-T
Y-Head units E20x-xxxY 09A00-Y
10T DISCHARGE HEAD (T) T-Head NPT E20x-xxxT 10T20-10
T-Head NPT with gauge port E20x-xxxTG 10T20-11
T-Head BSPT E20xB-xxxT 10T20-20
10Y DISCHARGE HEAD (Y) Y-Head NPT E20x-xxxY 10Y20-10
Y-Head NPT with gauge port E20x-xxxYG 10Y20-11
Y-Head BSPT E20xB-xxxY 10Y20-20
11A SHAFT PIN (UPPER) - Stainless Steel All E20 models 11A00-0
11B SHAFT PIN (LOWER) - Stainless Steel All E20 models 11B20-0
12 SHAFT EXTENSION - Galvanized Steel (specify riser length) E20 (riser
>30cm) 1200-xxx
13 RISER PIPE - Galvanized Steel (specify riser length) E20x (NPT) 1320-1-xxx
E20xB (BSPT) 1320-2-xxx
14EM VALVE HOUSING - Stainless Steel – Male Inlet E20M (NPT) 14EM20-1
E20MB (BSPT) 14EM20-2
14EV VALVE HOUSING - Stainless Steel – Victaulic Inlet E20V (NPT) 14EV20-1
H20VB (BSPT) 14EV20-2
16 SHAFT SPACER – Stainless Steel (2 required) E20 (riser <30cm) 1620
17E DRAIN VALVE BALL - Stainless Steel (2 required) All E20 models 17E00
18E DRAIN VALVE SPRING - Stainless Steel (2 required) All E20 models 18E00
19 VALVE SCREW - Stainless Steel All E20 models 1920
20 VALVE DISC - Stainless Steel All E20 models 2020
21 DISC RETAINER NUT - Stainless Steel All E20 models 2100
23 O-RING (Lower Seal) - Buna-N Rubber 90 Durometer All E20 models 23E20
24E VALVE BODY - Bronze All E20 models 24E20
25 O-RING (Disc Seal) - Buna-N Rubber 70 Durometer All E20 models 2500
26 DISC RETAINER PIN All E20 models 2600
27E DRAIN VALVE BODY – Bronze (2 required) All E20 models 27E00
28E O-RING DRAIN VALVE BODY – Silicone Rubber (2 required) All E20 models
28E00
29E O-RING DRAIN VALVE BALL – Silicone Rubber (2 required) All E20 models
29E00
HTM
CAM & GROOVE ADAPTORS –
NPT 750 psi rated, all fittings are EXTRUDED ALUMINUM ALLOY – HARD-COAT
ANODIZED for durability.
New for 2009, LOWER prices on HTM hydrants. Call for a quote.
PART
|
Description
|
|
CA1512
|
TYPE
A – 1 ½” MALE CAM X 1 ¼” FEMALE NPT
|
|
CA1515
|
TYPE
A – 1 ½” MALE CAM X 1 ½” FEMALE NPT
|
|
CA2015
|
TYPE
A – 2” MALE CAM X 1 ½” FEMALE NPT
|
|
CA2020
|
TYPE
A – 2” MALE CAM X 2” FEMALE NPT
|
|
CA2520
|
TYPE
A – 2 ½” MALE CAM X 2” FEMALE NPT
|
|
CA2525
|
TYPE
A – 2 ½” MALE CAM X 2 ½” FEMALE NPT
|
|
CB1515
|
TYPE
B – 1 ½” FEMALE CAM X 1 ½” MALE NPT
|
|
CB1520
|
TYPE
B – 1 ½” FEMALE CAM X 2” MALE NPT
|
|
CB2020
|
TYPE
B – 2” FEMALE CAM X 2” MALE NPT
|
|
CB2025
|
TYPE
B – 2” FEMALE CAM X 2 ½” MALE NPT
|
|
CB2525
|
TYPE
B – 2 ½” FEMALE CAM X 2 ½” MALE NPT
|
|
CD1512
|
TYPE
D – 1 ½” FEMALE CAM X 1 ¼” FEMALE NPT
|
|
CD1515
|
TYPE
D – 1 ½” FEMALE CAM X 1 ½” FEMALE NPT
|
|
CD2015
|
TYPE
D – 2” FEMALE CAM X 1 ½” FEMALE NPT
|
|
CD2020
|
TYPE
D – 2” FEMALE CAM X 2” FEMALE NPT
|
|
CD2520
|
TYPE
D – 2 ½” FEMALE CAM X 2” FEMALE NPT
|
|
CD2525
|
TYPE
D – 2 ½” FEMALE CAM X 2 ½” FEMALE NPT
|
|
CF1515
|
TYPE
F – 1 ½” MALE CAM X 1 ½” MALE NPT
|
|
CF1520
|
TYPE
F – 1 ½” MALE CAM X 2” MALE NPT
|
|
CF2015
|
TYPE
F – 2” MALE CAM X 1 ½” MALE NPT
|
|
CF2020
|
TYPE
F – 2” MALE CAM X 2” MALE NPT
|
|
CF2025
|
TYPE
F – 2” MALE CAM X 2 ½” MALE NPT
|
|
CF2525
|
TYPE
F – 2 ½” MALE CAM X 2 ½” MALE NPT
|
|
CDC15
|
DUST
CAP – 1.5”
|
|
CDC20
|
DUST
CAP – 2”
|
HTM
H-Series snowmaking hydrants –
2 inch size (NPT), internal drain.
Call for a quote, due to raw materials cost increase.
Note: 2.5” H-Series hydrants also available.
PART
|
Description
|
|
H20F-030T
|
30
CM (1’) RISER, 2” FNPT INLET
|
|
H20F-060T
|
60
CM (2’) RISER, 2” FNPT INLET
|
|
H20F-090T
|
90
CM (3’) RISER, 2” FNPT INLET
|
|
H20F-100T |
100cm (3.3 ft) RISER, 2" F NPT INLET |
|
H20F-120T
|
120
CM (3.9’) RISER, 2” FNPT INLET
|
|
H20F-150T
|
150
CM (4.9’) RISER, 2” FNPT INLET
|
|
H20F-180T
|
180
CM (5.9’) RISER, 2” FNPT INLET
|
|
H20F-210T
|
210
CM (6.9’) RISER, 2” FNPT INLET
|
|
H20F-240T
|
240
CM (7.9’) RISER, 2” FNPT INLET
|
|
H20F-270T
|
270
CM (8.9’) RISER, 2” FNPT INLET
|
|
H20F-300T
|
300
CM (9.8’) RISER, 2” FNPT INLET
|
|
H20F-330T
|
330
CM (10.8’) RISER, 2” FNPT INLET
|
|
H20F-360T
|
360
CM (11.8’) RISER, 2” FNPT INLET
|
|
H20F-400T
|
400
CM (13.1’) RISER, 2” FNPT INLET
|
|
|
|
|
H20M-030T
|
30
CM (1’) RISER, 2” MNPT INLET
|
|
H20M-060T
|
60
CM (2’) RISER, 2” MNPT INLET
|
|
H20M-090T
|
90
CM (3’) RISER, 2” MNPT INLET
|
|
H20M-100T |
100cm (3.3 ft) RISER, 2" M NPT INLET |
|
H20M-120T
|
120
CM (3.9’) RISER, 2” MNPT INLET
|
|
H20M-150T
|
150
CM (4.9’) RISER, 2” MNPT INLET
|
|
H20M-180T
|
180
CM (5.9’) RISER, 2” MNPT INLET
|
|
H20M-210T
|
210
CM (6.9’) RISER, 2” MNPT INLET
|
|
H20M-240T
|
240
CM (7.9’) RISER, 2” MNPT INLET
|
|
H20M-270T
|
270
CM (8.9’) RISER, 2” MNPT INLET
|
|
H20M-300T
|
300
CM (9.8’) RISER, 2” MNPT INLET
|
|
|
Service
wrench for 2” hydrants $95 to $130 (no discount)
|
|
H20x-xxxY
|
ANGLED
(45°) HEAD VERSION
|
|
H20x-xxxxG
|
GAUGE
PORT HEAD VERSION
|
|
H20V-xxxx
|
VICTAULIC
GROOVE INLET VERSION ADD:
|
HTM
E-Series snowmaking hydrants
–
2 inch size (NPT)
external drains.
Call for a quote, due to raw materials cost increase.
PART
|
Description
|
|
E20M-030T
|
30
CM (1’) RISER, 2” FNPT INLET
|
|
E20M-060T
|
60
CM (2’) RISER, 2” FNPT INLET
|
|
E20M-090T
|
90
CM (3’) RISER, 2” FNPT INLET
|
|
E20M-120T
|
120
CM (3.9’) RISER, 2” FNPT INLET
|
|
E20M-150T
|
150
CM (4.9’) RISER, 2” FNPT INLET
|
|
E20M-180T
|
180
CM (5.9’) RISER, 2” FNPT INLET
|
|
E20M-210T
|
210
CM (6.9’) RISER, 2” FNPT INLET
|
|
E20M-240T
|
240
CM (7.9’) RISER, 2” FNPT INLET
|
|
E20M-270T
|
270
CM (8.9’) RISER, 2” FNPT INLET
|
|
E20M-300T
|
300
CM (9.8’) RISER, 2” FNPT INLET
|
|
H20x-xxxY
|
ANGLED
(45°) HEAD VERSION
|
|
H20x-xxxxG
|
GAUGE
PORT HEAD VERSION
|
|
H20V-xxxx
|
VICTAULIC
GROOVE INLET VERSION ADD:
|
HTM Filters and gaskets
PART
|
Description
|
|
CG-15F
|
1.5”
Face gasket
|
|
CG20F-1
|
2”
Face gasket
|
|
CG25F-1
|
2.5”
Face gasket
|
|
|
|
|
|
1.5”
CDF inline Filter complete 60 mesh
|
|
|
2”
CDF inline Filter complete 60 mesh
|
|
CDS15-60
|
CDS
Style screen 1.5”
|
|
CDS20-60
|
CDS
Style screen 2”
|
|
|
1.5”
CLF inline Filter complete 60 mesh
|
|
|
2”
CLF inline Filter complete 60 mesh
|
|
CLS15-60
|
CLS
Style screen 1.5”
|
|
CLS20-60
|
CLS
Style screen 2”
|
|
CLT1515
|
LF
Tower adaptor – 1.5”M x 1.5”FNPT C/W DRAIN
|
|
CLT2015
|
LF
Tower adaptor – 1.5”M x 1.5”FNPT C/W DRAIN
|
HTM Hose coupling and Electrical plugs
and pedestals
We have all the parts needed for coupling your own snowmaking hose.
Call us for details.
|
Part
|
Description
|
|
CX300E
|
Expander
without hydraulic pump
|
|
CX300P
|
Expander
with internal hand hydraulic pump
|
|
CT200-1
|
Expansion
unit – 2” w/ camlock spacer
|
|
CT3001
|
Ring
removal tool – replacement tip set
|
|
|
|
|
PM460C7W
|
McGill
cord conn (female) – 60A 480V 3P 4W RED
|
|
PM460C5W
|
McGill
cord conn (female) – 60A 600V 3P 4W BLACK
|
|
PM460P7W
|
McGill
cord conn (male) – 60A 480V 3P 4W
|
|
PM460P5W
|
McGill
cord conn (male) – 60A 600V 3P 4W
|
|
HBL460C7W
|
Hubbell
cord conn (female) – 60A 480V 3P 4W RED
|
|
HBL460C5W
|
Hubbell
cord conn (female) – 60A 600V 3P 4W BLACK
|
|
HBL460P7W
|
Hubbell
cord conn (male) – 60A 480V 3P 4W RED
|
|
HBL460P5W
|
Hubbell
cord conn (male) – 60A 600V 3P 4W BLACK
|
|
PM460RS7W
|
McGILL
RECEPTACLE – 60A 480V 3P 4W RED
|
|
PM460RS5W
|
McGILL
RECEPTACLE – 60A 600V 3P 4W BLACK
|
|
HBL460R7W
|
HUBBELL
RECEPTACLE – 60A 480V 3P 4W RED
|
|
HBL460R5W
|
HUBBELL
RECEPTACLE – 60A 600V 3P 4W BLACK
|
|
Many
options available for electrical pedestals including double heads.
SMP series needs base unit. To
best match your current electrical plugs please include brand name and
model numbers on plug.
|
|
SMP-60H7-5
|
SMP
Series electric pedestal 60A 480V IEC PIN-SLEEVE-5k AIC
|
|
200-3300-2
|
Base
unit-200A 600V 48” high-2-300MCM/phase
|
|
210-3300-2
|
Base
unit-200A 600V 60” high-2-300MCM/phase
|
|
SE-1060HL-5-hh
|
SE
Series (post mount)60A 480V IEC PIN-SLEEVE – 5kAIC
|
|
SE-1030H7-10-hh
|
SE
Series (post mount)30A 480V IEC PIN-SLEEVE – 10kAIC
|
| Part Number |
Description |
| 0100-1 |
SOCKET HEAD BOLT - Ø
6mm (includes #0200 washer) |
We have parts for all items listed and we have hose
coupling sets, replacement cam arms, tail gaskets and expansion rings.
Didn’t find it on this list, contact us and we will find it.
Shipping not included on HTM Group products.
for complete details of HTM Group products click here.
|
|
|
|
|
|
Type A
|
Type B
|
Type D
|
Type F
|
|
|
|
|
|
|
|
Type C
|
Type E
|
Type T
|
- Hose Couplings
use internal expansion system to fit most types of hose
- Coupling sets
include brass expansion rings and rubber tail gaskets
|
|
|
|
|
Dust Cap
|
Inline
Coupler with Pressure Test Port
|
HTM has many happy
customers around the world including our own customers listed below.
CHS - HTM customers
Aspen, CO
Aspen Highlands, CO
Breckenridge, CO
Buttermilk, CO
Copper Mtn, CO
Colorado Mtn College, CO
Beaver Creek, CO
Sol Vista, CO
Eldora, CO
Echo Mountain, CO
Steamboat, CO
Telluride, CO
Arapahoe Basin, CO
Howelsen Hill, CO
Snowmass, CO
Vail, CO
Southfork Tubing Hill, ID
Ski Apache, NM
Sipapu, NM
Santa Fe, NM
Diamond Peak, NV
Ski Beech, NC
Wolf Mountain, UT
Brian Head, UT
Park City, UT
Homewood, CA
Snow Drifts, CA
Mt Baldy, CA
Mt High, CA
Snow Valley, CA
Jackson Hole, WY
Mich Tech/Mont Ripley Ski Area, MI
Red Lodge, MT
Big Sky, MT
Bridger Bowl, MT
Great Divide, MT
White Face, MT
Sunrise, AZ
The Summit at Snoqualmie, WA
Winter Thunder Snow Cross, IL
Perfect North Slopes, IN
Sundown, IA
Conversion Chart
For more conversions go to Online
Conversion.
| CFM |
Cubic meter/min |
PSI |
BAR |
Fº |
Cº |
GPM |
L/min |
| 5.7 |
0.16 |
60 |
4.13 |
32 |
0 |
1 |
3.785 |
| 11.3 |
0.32 |
90 |
6.2 |
28 |
-2.2 |
5 |
18.92 |
| 11.8 |
0.33 |
100 |
6.9 |
25 |
-3.8 |
10 |
37.85 |
| 18.1 |
0.51 |
150 |
10.35 |
20 |
-6.6 |
20 |
75.70 |
| 24.3 |
0.68 |
200 |
13.78 |
15 |
-9.4 |
40 |
151.41 |
| 50 |
1.41 |
300 |
20.6 |
10 |
-12.2 |
60 |
227.12 |
| 75 |
2.12 |
400 |
27.6 |
0 |
-17.7 |
100 |
378.54 |
| 185 |
5.2 |
500 |
34.5 |
-10 |
-23.3 |
110 |
416.39 |
|
